1430820

Miniature Contact Module

New product

The MCM is used to monitor the status of an initiating device(s) that contain a normally open set of dry contacts. The module is enclosed in a plastic case to protect against inadvertent shorts and ground faults. The case can be mounted using the screw tabs or the tabs may be snipped off for installation in an electrical box. The MCM does not contain a status indication LED.

  • One Class B (Style B) contact monitoring input 
  • Small size allows mounting in most electrical boxes 
  • SLC Class A (Style 6,7) & Class B (Style4) 
  • Wiring terminals accept 22 to 14 AWG 
  • Product includes a 5 year warranty

Technical Specifications

  • Operating Voltage : 22.0-24.0V
  • Max SLC Standby Current : 325 µA
  • Max SLC Alarm Current : 325 µA
  • IDC Input Circuit Wiring Style : Class B
  • Max Wiring Resistance of IDC :100 Ω
  • Max Wiring Cpacitance of IDC : 1µF
  • EOL Resistor : 5.1K Ω
  • Operating Tempurature Range : 32 to 120ºF (0 to 49ºC)
  • Operating Humidity Range : 0 to 93% (non-condensing)
  • Max no. of Module Per Loop : 127 units
  • Dimensions : 2.58” (65.5mm)L × 2.32” (59mm)W × .29” (24mm)D
  • Mounting Options : 2-1/2” (64mm) deep singlegang box
  • Shipping Weight : 0.3 lbs

6 other products in the same category: