Dual certified exe/Exd barrier gland, providing a seal around individual cable cores, especially for cables that exhibit “cold flow” characteristics, are not effectively filled or have hygroscopic fillers. For use with braid armoured marine shipboard jacketed or non-jacketed cables. The ICG/653/UNIVERSAL is available with either ExPress liquid barrier resin or QSP 2-part hand mix compound, both with a cure time of 30 minutes
- Inspectable Deluge Seal - Offering IP66, IP67, IP68 & IP69 Ingress Protection
- Worlds only NEC Certified Transparent Elastomeric Fully Inspectable Compound Pot – compatible with both injectable resin and 2 part compound
- Reversible Armour Clamp - For all types of armour and braid
- Patented Cable Gland Tightening Guide - Helps prevent damage caused by over tightening
- Unique Rear Seal - Offering ultimate sealing over an extremely wide cable acceptance range
General
| Ambient Temp. Range |
- (UL) -50°C to +80 °C
- (ATEX/IECEx) -60°C to +85 °C
|
| Application |
Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC |
| Ingress Protection |
|
| Material |
Brass, NP Brass or Stainless Steel |
| Series |
American Series Cable Glands |
Certifications and Compliance
| CSA File Number |
UL 2225, CSA C22.2 No. 174-18, UL 514B and CSA C22.2 NO. 18.3-12 |
| Certification |
- UL 2225, CSA C22.2 No. 174-18, UL 514B and CSA C22.2 NO. 18.3-12
- IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31
|
| Hazardous Rating(s) |
- Class I, Groups A, B, C and D
- Class II, Groups E, F and G
- Class III
- DTS01
|
| UL File Number |
UL 514B |
